![]() ![]() The result is a design that blows minds, not budgets. This optimizes the materials that are used while allowing more solar cells per square foot. First, screw the sliding nut on the mid clamp to the bottom of the bolt, and then put it sideways into the groove of the rail, as the picture 14 shows.Īfter install the mid clamp, as the picture 15 shows.Ģ.1 According to the above steps, use the mid clamp to install the panels from left to right, as the picture 16 shows.Ģ.2 After the overall installation as the picture 17-18. 4 Galvanized Metal Panels By incorporating the solar sections of the roof with roll formed metal, the Forward Solar Roof does away with the bulky frames found on conventional solar panels. After all the rails are installed, as picture 10 shows.ġ.8 Put the panel vertically on the two rails, the installation sequence can be from left to right, from bottom to top, first press the solar panel by hand to prevent the panel from sliding down, as picture 11 shows.ġ.9 Use the end clamp to lock the side of panels, screw the sliding nut on the end clamp to the bottom of the bolt, and then put it sideways into the groove of the rail, as picture 12 shows.Īfter install the end clamp, as the picture 13 shows.Ģ.0 The installation of the mid clamp is the same as that of the end clamp. As picture 6 shows.ġ.5 Effect after installation.As picture 7 shows.ġ.6 Use the rail splice for the connection between the rail and the rail, insert the connector into the groove on the inner side of the rail, insert 75mm on each side, and then lock the bolts, as picture 8 shows.ġ.7 According to the above steps, connect the rails with rail splice first, and then install the rails on the hooks according to the construction drawings. After installation, as picture 5 shows.ġ.4 Use M8*25 clamp and bolt assembly to install the rail on the stainless-steel hook #1. Open the tiles where the hooks need to be installed, as picture 2 shows.ġ.2 Put the stainless steel hook #1 on the installation position of the main beam, and fix the hook with three wood screws (ST6.3 * 80), as picture 3 shows.ġ.3 According to step 2, fix all the remaining stainless-steel hooks on the main beam according to the drawings. Buy China solar roof curve tile 30w cigs thin film photovoltaic power generates energy system glass shingle from wholesale supplier jiangsu sht information. Installation instructions for solar clay tile roofing mounts with roof hook SPC-IK01ġ.1 Clean the Roman/clay/curved tile roof, and according to the size on the construction drawing, ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |